Stager FD 10000E+380V ATS 8kW gasoline generator, electric start

Description:
Single-phase current generator, compact, reliable, easy to handle and use. Recommended for both home and industrial, professional users.
The generator can also be used together with the three-phase automation provided, so that it starts automatically when the mains connection no longer has voltage. It represents the ideal equipment in case of emergency power supply of vital consumers (lighting, surveillance systems, heating, water supply, refrigerators, etc., respecting the power limit).
Powerful thermal engine of 19 HP, on gasoline, in four strokes, low fuel consumption and which meets the EURO5 standards in terms of environmental pollution.
Automatic Voltage Regulator (AVR) that limits voltage fluctuations produced by the alternator.
The generator control panel, intuitive and easy to use, includes most functions and controls of the generator:
- 3 in 1 digital display with display for: voltage, frequency and operating hours.
- oil pressure warning LED - signals to the user when the oil level in the bathroom drops
- the thermal fuse that interrupts the voltage supply when the equipment is overloaded, thus protecting the equipment.
Wheel kit for moving short distances, if needed, and folding handle on the generator housing to reduce the size of the equipment. The handle is equipped with a rubber sponge that ensures a firm grip and a locking/unlocking pin.
Chassis built on a protective tubular metal frame and equipped with rubber mounts to increase stability and reduce vibration during operation.
Easy access to the air filter for easy cleaning or replacement.
12 volt DC outlet for light applications or rectified batteries
The generator is equipped with two single-phase sockets with a protective cover.
Side protection cover for muffler.
Large capacity fuel tank with fuel level indicator.
The generator is equipped with an automatic shock to be able to start without any kind of human intervention, when it is connected together with the automation.

Benefits:
AVR
overvoltage protection relay
frequency, voltage and operating hours counter
oil pressure warning led
thermal safety
removable handle
easy handling with the standard set of wheels
automatic start when the voltage drops, through the included three-phase ATS module

Technical data:
Nominal power: 8 kW
Maximum power: 8.5 kW
Nominal voltage: 230 V
Nominal frequency: 50 Hz
Nominal current: 35 A
Power factor: 0.8
Engine Model: YH192FB(E)
Engine type: Petrol engine, 4 stroke, 1 cylinder, OHV, air cooling
Nominal power: 19 HP
Nominal speed: 3000 rpm
Cylinder capacity: 459 cmc
Oil bath capacity: 1.2 L
Oil type: SAE10W-40, 15W-40
Fuel: unleaded petrol
Fuel tank capacity: 22 l
Voltage regulation mode: AVR
Ignition system: CDI
Winding: 100% copper
Dimensions: 720 x 540 x 595 mm
Noise level LwA: 96 dB(A)
Starting system: cable / electric
Autonomy: 5 hours
Net/gross weight: 98 / 102 kg

Fuel consumption:
@ 100% load: 5.48 L/h
@ 75% load: 4.93 L/h
@ 50% load: 3.77 L/h

Delivery set:
fuel funnel
2 plugs
fixed key 10-12
Phillips screwdriver
spark plug wrench
manual in Romanian

Automation technical data:
ATS working voltage: 9~15 Vdc
Contactor rated current: 25 A
Battery charger
Input voltage: 220/380 Vac
Output voltage: 13.8 Vdc (±2%)
Charging current: 1 A
Dimensions: 300 x 225 x 140 mm
Connection cable length: 3 m
Working temperature: -15...+60 C
Cable diameter: 6 mm²

About automation:
The automation of the generator ensures the coupling/decoupling of the contactors and the starting and stopping of the generator when it detects the lack of voltage in the network.
Automation is especially important when you connect the equipment to the grid because it is forbidden to feed consumers from two sources that are not synchronized in frequency, plus the very high possibility of discharging the electric current into the national grid.
Automation notices the lack of voltage in the network and orders the generator to start.
After the generator starts and the parameters stabilize, the automation disconnects the main network and connects the power supply from the generator (all this time the main network is monitored and when the supply voltage returns to the parameters, it is ordered to stop the generator and switch back to the network).
The generator automation is equipped with the generator battery charging source so that it is always ready to start.
The automation is equipped with relays for changing the minimum and maximum voltage of the main network, for which the generator will receive the start command. There are very common cases where the mains voltage varies quite a lot and the generator will consider it unacceptable