Konner & Sohnen Basic KSB 2800A gasoline generator, 2.8 kW

The K&S Basic range of petrol generators is based on KSB engines, which are quite quiet and very reliable due to the superior position of the intake and exhaust valves. The engines comply with all European quality standards.
Engines with individual serial numbers
ENGINES WITH INDIVIDUAL SERIAL NUMBERS

The engines comply with all world and European standards of quality, economy and environmental protection (including the level of harmful emissions and noise level). Each engine and each generator has its own serial number, which allows us to control the quality of production and service.
ELASTIC HANDLES
ELASTIC HANDLES
For the most comfortable transport, elastic handles are used that perfectly complement the design and final appearance of the equipment.

PRACTICAL STARTING SYSTEM
PRACTICAL STARTING SYSTEM
Generators are easy to use and do not require special skills, they are suitable for use by all categories of users. The very practical manual start allows you to start the engine quickly and effortlessly.

ERGONOMIC AND PRACTICAL CONTROL PANEL
ERGONOMIC AND PRACTICAL CONTROL PANEL

The ergonomic and practical control panel allows easy operation of all generators and does not require additional skills. The voltmeter on the panel indicates the voltage emitted by the device in the range of 0 to 300 volts. This allows a control of the output voltage from the generator and ensures that all equipment connected to the generator will operate constantly.
AVR
AVR

Generators of the «К&S Basic» series are equipped with an intelligent AVR voltage stabilization system. It allows the voltage to be maintained at a constant value of 230 V and protects against unwanted short circuits.
Rubber mounts to reduce vibration
RUBBER MOUNTS TO REDUCE VIBRATION
All K&S Basic generator models are equipped with rubber feet to reduce vibration. Thanks to the rubber shock absorbers, the working generator will not damage the floor and the paint on the frame will not jump.

Accessory set
SET OF ACCESSORIES

The assembly includes two 230 V, 16 A spark plugs and a spark plug wrench.


Technical specifications:
Voltage, V 230
Maximum power, kW 2.8
Nominal power, kW 2.5
Frequency, Hz 50
Current (max), А 12.17
Sockets 2 x Schuko 230 V
Fuel tank volume, l 12
Voltmeter +
Noise level Lpa (7m)/Lwa, dB 71/96
DC output, V/А 12/8.3
Engine model KSB 220
Engine type Four-stroke gasoline
Engine power, 7 HP
Oil capacity, l 0.6
Cylinder capacity, cm3 210
AVR controller intelligent voltage stabilization system
Engine starting manual
Protection class IP23M
Aluminum alternator coil
Gross dimensions (L×W×H), mm 605x440x435
Net weight, kg 36.2
Gross weight, kg 38
recommendation
KIT KS 3 transport sets
-3%
KIT KS 3 transport sets
149.00 RON